Here's a bunch of facts.
The noun "scissors" is treated as a plural noun, and therefore takes a plural verb ("these scissors are"). Alternatively, this tool is also referred to as "a pair of scissors". In American English, "a pair" is singular and therefore takes a singular verb ("this pair of scissors is"). In British English, "a pair" does not take the singular ("this pair of scissors are"). The word shears is used to describe similar instruments that are larger in size and for heavier cutting. Opinions vary geographically as to the size at which 'scissors' become 'shears', but this is often at between six to eight inches (about 15 to 20 cm) in length.
It is most likely that scissors were invented around 1500 BC in ancient Egypt. The earliest known scissors appeared in Mesopotamia 3,000 to 4,000 years ago. These were of the 'spring scissor' type comprising two bronze blades connected at the handles by a thin, flexible strip of curved bronze which served to hold the blades in alignment, to allow them to be squeezed together, and to pull them apart when released.
Spring scissors continued to be used in Europe until the 16th century. However, pivoted scissors of bronze or iron, in which the blades were pivoted at a point between the tips and the handles, the direct ancestor of modern scissors, were invented by the Romans around 100. They entered common use not only in ancient Rome, but also in China, Japan, and Korea, and the idea is still used in almost all modern scissors.
During the Middle Ages and Renaissance, spring scissors were made by heating a bar of iron or steel, then flattening and shaping its ends into blades on an anvil. The center of the bar was heated, bent to form the spring, then cooled and reheated to make it flexible.
William Whiteley & Sons (Sheffield) Ltd. is officially recognized as first starting the manufacture of scissors in the year 1760, although it is believed the business began trading even earlier. The first trade-mark, 332, was granted in 1791.
Pivoted scissors were not manufactured in large numbers until 1761, when Robert Hinchliffe produced the first pair of modern-day scissors made of hardened and polished cast steel. He lived in Cheney Square, London and was reputed to be the first person who put out a signboard proclaiming himself "fine scissor manufacturer".
During the 19th century, scissors were hand-forged with elaborately decorated handles. They were made by hammering steel on indented surfaces known as bosses to form the blades. The rings in the handles, known as bows, were made by punching a hole in the steel and enlarging it with the pointed end of an anvil.
In 1649, in Swedish-ruled Finland, an ironworks was founded in the village of Fiskars between Helsinki and Turku. In 1830, a new owner started the first cutlery works in Finland, making, among other items, scissors with the Fiskars trademark. In 1967, Fiskars Corporation introduced new methods to scissors manufacturing.
