2
« previous next »
Pages: [1]   Go Down

Author Topic: Brakes  (Read 431 times)

0 Members and 2 Guests are viewing this topic.

Offline Parts

  • The Mad
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 37468
  • Karma: 3061
  • Gender: Female
  • Who are you?
Brakes
« on: March 12, 2011, 07:29:09 PM »
Had a friend come over today and help with my rear brakes, I had never changed rear disc brakes felt better having someone around who works on cars all the time.  They had been scraping some for a couple weeks and a couple days ago they began making hellish noises  but I was always busy or it was raining so it didn't get done till today.  We took off the tires and where shocked one caliper must have been stuck and the fins on the rotor were coming through the face of it.  He had never seen anything like it and told me I was lucky it didn't shatter.  I know there are some car people here anyone ever see any rotors this bad?

Logged
"Eat it up.  Wear it out.  Make it do or do without." 

'People who say it cannot be done should not interrupt those who are doing it.'
George Bernard Shaw

Offline Diesel

  • Log splitting aspie elitist
  • Elder
  • Intense Poster
  • *****
  • Posts: 938
  • Karma: 213
  • Gender: Male
  • Oblivitard
Re: Brakes
« Reply #1 on: March 12, 2011, 07:33:01 PM »
I have never seen rotors that bad.....especially on one side only.
Only thing I can think of is maybe a piston on one side of the brake caliper was sticking  :dunno:
Logged

Osensitive1

  • Guest
Re: Brakes
« Reply #2 on: March 12, 2011, 07:37:32 PM »
Had both the front ones replaced recently. They were paper thin like that from the side view, but didn't have the spokes showing through like your photo.
Logged

Offline Parts

  • The Mad
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 37468
  • Karma: 3061
  • Gender: Female
  • Who are you?
Re: Brakes
« Reply #3 on: March 12, 2011, 07:43:25 PM »
It wasn't sliding correctly, cleaned it up and greased the slides and it works fine now.  You could see light coming through them by the fins and I could bend them with my fingers :o
Logged
"Eat it up.  Wear it out.  Make it do or do without." 

'People who say it cannot be done should not interrupt those who are doing it.'
George Bernard Shaw

P7PSP

  • Guest
Re: Brakes
« Reply #4 on: March 12, 2011, 08:23:36 PM »
Noowhere near thhat bad.   :zombiefuck:
Logged

Offline Callaway

  • Official Spokesperson for the Aspie Elite
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 29267
  • Karma: 2488
  • Gender: Female
Re: Brakes
« Reply #5 on: March 13, 2011, 08:48:14 AM »
I have seen them bad, where I haven't been able to have the rotor turned and had to replace it, but never as bad as yours.  I did have a piston on a caliper stick one time, but I got to it quicker before the rotor looked that bad.  You're lucky you checked the brakes when you did.
Logged

TheoK

  • Guest
Re: Brakes
« Reply #6 on: March 13, 2011, 08:52:33 AM »
Haha, that was ugly.

My dad actually makes his own disc brakes.  :viking:
Logged

Offline Icequeen

  • News Box Slave
  • Insane Postwhore
  • *****
  • Posts: 12027
  • Karma: 2030
  • Gender: Female
  • I peopled today.
Re: Brakes
« Reply #7 on: March 13, 2011, 09:42:49 AM »
Normally stuck caliper or (GM rear ?) parking brake is fucking up/sticking. I'd keep an eye on it.

I've seen them almost paper thin, but never to that point.  Wow. :zombiefuck:
Logged

Offline Diesel

  • Log splitting aspie elitist
  • Elder
  • Intense Poster
  • *****
  • Posts: 938
  • Karma: 213
  • Gender: Male
  • Oblivitard
Re: Brakes
« Reply #8 on: March 13, 2011, 01:04:51 PM »
On a plus note I'd think your MPG's should go up a bit.
Logged

Offline Queen Victoria

  • Ruler of Aspie Universe
  • Elder
  • Almighty Postwhore
  • *****
  • Posts: 28244
  • Karma: 2805
  • Gender: Female
Re: Brakes
« Reply #9 on: March 13, 2011, 02:07:29 PM »
It took me four separate visits to this thread to finally figure out how ya'll were talking.  After puzzling over the pictures I finally think I know more than I did before.  I wouldn't feel comfortable driving with metal that thin.  Now I'll know what to look for if I'm ever shown a rotor/caliper by the shop.  Thanks.
Logged
A good monarch is a treasure. A good politician is an oxymoron.

My brain is both uninhibited and uninhabited.

:qv:

Offline Parts

  • The Mad
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 37468
  • Karma: 3061
  • Gender: Female
  • Who are you?
Re: Brakes
« Reply #10 on: March 13, 2011, 03:25:45 PM »
Quote from: Diesel on March 13, 2011, 01:04:51 PM
On a plus note I'd think your MPG's should go up a bit.

That would be great as I only get about 9mpg.
Logged
"Eat it up.  Wear it out.  Make it do or do without." 

'People who say it cannot be done should not interrupt those who are doing it.'
George Bernard Shaw

Offline Callaway

  • Official Spokesperson for the Aspie Elite
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 29267
  • Karma: 2488
  • Gender: Female
Re: Brakes
« Reply #11 on: March 13, 2011, 05:24:33 PM »
Quote from: Queen Victoria on March 13, 2011, 02:07:29 PM
It took me four separate visits to this thread to finally figure out how ya'll were talking.  After puzzling over the pictures I finally think I know more than I did before.  I wouldn't feel comfortable driving with metal that thin.  Now I'll know what to look for if I'm ever shown a rotor/caliper by the shop.  Thanks.

A normal rotor should be equally thick on both sides, not paper-thin on one side like Part's rotor is:



The caliper is the part of the braking system that has hydraulic pistons which press the brake pads onto both sides of the rotors when the brakes are applied.
Logged

Scrapheap

  • Guest
Re: Brakes
« Reply #12 on: March 13, 2011, 08:08:53 PM »
Quote from: parts on March 12, 2011, 07:43:25 PM
It wasn't sliding correctly, cleaned it up and greased the slides and it works fine now.  You could see light coming through them by the fins and I could bend them with my fingers :o

The second I saw the picture I could tell that. You're lucky that was on the rear brake. If that was on the front, the results could be catastrophic!!!  :o  :o  :o

I'm realy suprised that you couldn't hear that sooner. :scratchhead:
Logged

Offline Parts

  • The Mad
  • Caretaker Admin
  • Almighty Postwhore
  • *****
  • Posts: 37468
  • Karma: 3061
  • Gender: Female
  • Who are you?
Re: Brakes
« Reply #13 on: March 14, 2011, 04:51:47 AM »
I heard it aout two weeks ago but it either was bad weather or I was busy with work.  I wasn't that worried and already figured I needed new rotors just never thought they were that bad
Logged
"Eat it up.  Wear it out.  Make it do or do without." 

'People who say it cannot be done should not interrupt those who are doing it.'
George Bernard Shaw

Offline Zippo

  • psychotic J-DAM of the aspie elite
  • Elder
  • Postwhore
  • *****
  • Posts: 2055
  • Karma: 253
  • Gender: Female
  • Click, Click, BOOM!
Re: Brakes
« Reply #14 on: March 14, 2011, 11:36:09 AM »
wow disturbing....
Logged

                                                         Zippo, Shotgun Surgeon.
if theres bees in the trap im catching them, by the thorax and abdomen. and sanding there stingers down to a rough quill. then i dip em in ink and i scribble a bit, and if the wriggle than i tickle them until they hold still, let me say it again, in my land of pretend, i use bees as a mother fucking pen!
Pages: [1]   Go Up
« previous next »